=========================================================================== Nortel Networks Inc. Updated: 01/17/2008 Enterprise NMS DIT Package README file for Ethernet Routing Switch 4524GT running agent software v5.1.0 (A Version) =========================================================================== DIT PACKAGE SUMMARY: =========================================================================== This document contains installation instructions, supported device list with management feature information and known limitations for Device Integration Toolkit (DIT) package of Ethernet Routing Switch 4524GT. This package adds support for Ethernet Routing Switch 4524GT running version 5.1.0 software into Enterprise Network Management System(ENMS). These DIT installation instructions are not included either in Enterprise NMS documentation or in Ethernet Routing Switch 4524GT documentation. Enterprise NMS 10.5.1 or later is required in order to install this DIT package and to get management support for Ethernet Routing Switch 4524GT running v5.1.0 agent software. DEVICES SUPPORTED: =========================================================================== Ethernet Routing Switch 4524GT switches (sysObjectID: 1.3.6.1.4.1.45.3.71.8) running agent software v5.1.0. NOTE: **** This DIT package requires NMS 10.5.1 or later **** CHANGE HISTORY: =========================================================================== 01/17/2008 - Created initial "A" version DIT package. INSTALLATION INSTRUCTIONS: =========================================================================== The default install location for Enterprise NMS DIT packages is: Unix ($OITHOME): /usr/dit Windows 2003 (%OITHOME%): :\ENMS\DIT All installation commands are relative to the directory containing the extracted (un-tarred or un-zipped) DIT package. The following commands should be executed in that directory. Manual installation on UNIX ----------------------------------------- 1. Log into Enterprise NMS workstation as root (su command). 2. Open a shell window and prepare your user environment with one of the following commands: source /opt/lnms/bin/opt_cshrc (for csh and tcsh) OR . /opt/lnms/bin/opt_kshrc (for sh or ksh) 3. Create a temporary directory for the DIT package. For example: mkdir /temp 4. Navigate to the directory you just created and download/copy DIT package to this location. Uncompress and untar the package using uncompress NMS_ERS4524GT_v510_A.tar.Z tar -xvf NMS_ERS4524GT_v510_A.tar 5. At the command prompt, type ./install 6. You are asked if you want to backup the existing databases. Choose yes or no. The installation script runs and copies various files (*.gif, *.mdb, *.dat, etc.) into the appropriate directories. Finally, the ditInstall utility is run to add Ethernet Routing Switch 4524GT support into Enterprise NMS. Manual installation on Windows ----------------------------------------------- 1. On your workstation, log in as administrator 2. Download and Copy the DIT package (a self-extracting archive) into :\enms\DIT\temp 3. Execute the DIT package file so that all the files in the package are extracted. The files are extracted in the directory :\enms\DIT\temp\NMS_ERS4524GT_v510_A 4. Open a command window. 5. Navigate to the directory that was created ( cd :\enms\DIT\temp\NMS_ERS4524GT_v510_A ) 6. At the command prompt type install.bat 7. You are asked if you want to backup the existing databases. Choose yes or no. The installation script runs and copies various files (*.gif, *.mdb, *.dat, etc.) into the appropriate directories. Finally, the ditInstall utility is run to add Ethernet Routing Switch 4524GT switch support into Enterprise NMS. Automated install using DITAdmin Tool on both UNIX and Windows ------------------------------------------------------------------- 1. Run ditadmin tool (packaged with NMS), at the command prompt by typing (on Unix and Windows) ditadmin 2. Download the DIT package and make sure that the package is located at: :\enms\DIT (on Windows) /opt/dit (on UNIX) 3. Select Tools->Install Component... menuitem. 4. In the Open dialog box, select the package and click on OK. 5. A dialog box pops up asking if you want to backup the existing databases. Choose yes or no. 6. Another dialog box should come up showing the progress of the DIT install. Select OK once DIT install is completed. Installation Results: --------------------- After successful installation an entry corresponding to Ethernet Routing Switch 4524GT v5.1.0 will be displayed in the DITAdmin Tool main window. MANAGEMENT FEATURES IN THIS RELEASE: =========================================================================== -- Device/Topology discovery and visualization -- OmniView -- SNMP Traps and Fault correlation -- Integration with HP OpenView and Tivoli NetView NMS platforms. DIT PACKAGE CONTENTS: =========================================================================== install install.bat (Windows only) NMS_ERS4524GT_v510_A.dit trapreg.dlg bmdaCondorX.gif ers4500x16.gif ers4500x24.gif ers4524gt.gif ers4526fx.gif ers4526gtx.gif ers4526gtxpwr.gif ers4526t.gif ers4526tpwr.gif ers4548gt.gif ers4548gtpwr.gif ers4550t.gif ers4550tpwr.gif mtrj26fx.gif usb_flash.gif bayStack.mib bayStackAdac.mib bayStackArpInspection.mib bayStackDhcpSnooping.mib bayStackErrorMessage.mib bayStackLacpExt.mib bayStackMulticastFlooding.mib bayStackRadius.mib bayStackStats.mib bayxlr.mib bnlog.mib bsee.mib bsn.mib draft-ietf-mpls-tc-mib-10.mib eapol-d10.mib ers4500_v510_info.dat ers4500_v510_info.mdb ianaAddressFamilyNumbers.mib ianaIfType.mib ieee8023-lag.mib lldp.mib lldpExtDot1.mib lldpExtDot3.mib nnmst.mib nnrst.mib nortelSecureNetworkAccess.mib pibFramework.mib pibNtnEvol.mib rapidCity.mib rc2k.mib rc2kAtm.mib rcBridge.mib rcError.mib rcIgmp.mib rcIp.mib rcIpBgp.mib rcIpMpls.mib rcMlt.mib rcOpm.mib rcPort.mib rcPos.mib rcRadius.mib rcTacacs.mib rcTls.mib rcTraps.mib rcVlan.mib rfc1213.mib rfc1513.mib rfc2021.mib rfc2213.mib rfc2465-tc.mib rfc2578.mib rfc2579.mib rfc2819.mib rfc2863.mib rfc2933.mib rfc3289.mib rfc3289tc.mib rfc3411.mib rfc3412.mib rfc3413-notif.mib rfc3413-tgt.mib rfc3414.mib rfc3415.mib rfc3418.mib rfc3584.mib rfc3621.mib rfc3635.mib rfc3826.mib rfc4001.mib rfc4133.mib rfc4188.mib rfc4293.mib rfc4363-p.mib rfc4363-q.mib s5age.mib s5cha.mib s5ctr.mib s5ecm.mib s5emt.mib s5erl.mib s5eth.mib s5etr.mib s5ifx.mib s5reg.mib s5roo.mib s5sbs.mib s5tcs.mib supported_objects synro.mib tripleDesConsortium.mib ers.20.m ers.20.p ers.26.m ers.26.p ers.32.m ers.32.p ers.38.m ers.38.p ers.44.m ers.44.p ers.50.m ers.50.p ers.64.m ers.64.p ers.ico (Windows only) SUPPORTED OPERATING SYSTEMS: =========================================================================== HPUX 11.11 Solaris 9 Solaris 10 Windows 2003 Server KNOWN LIMITATIONS: =========================================================================== (1) The Embedded Web Interface launchpoint doesn't work when SSL protocol is set because the usually HTTP protocol is changed by the HTTPS secure protocol. (2) Q01587817 - ERS2500 v400: Active menus in EV for copper port when GBic port is active The same issue appears for ERS 4500 series. (3) Q01802400 - No info for XFP ports in DIV for ERS 4526GTX in standalone/stack mode (4) Q01802418 - No info for XFP ports in EV-Logical View for ERS 4526GTX in mix stack config (5) Q01802461 - MIB-II Interface panes don't display correctly for ERS4526GTX =========================================================================== (c) 2005-2008 Nortel Networks Incorporated. All rights reserved. ===========================================================================