=========================================================================== Nortel Networks Inc. Updated: 05/09/2007 Enterprise NMS DIT Package README file for Ethernet Routing Switch 4548GT-PWR running agent software v5.0.0 (A Version) =========================================================================== DIT PACKAGE SUMMARY: =========================================================================== This document contains installation instructions, supported device list with management feature information and known limitations for Device Integration Toolkit (DIT) package of Ethernet Routing Switch 4548GT-PWR. This package adds support for Ethernet Routing Switch 4548GT-PWR running version 5.0.0 software into Enterprise Network Management System (ENMS). These DIT installation instructions are not included either in Enterprise NMS documentation or in Ethernet Routing Switch 4548GT-PWR documentation. Enterprise NMS 10.4.2 or later is required in order to install this DIT package and to get management support for Ethernet Routing Switch 4548GT-PWR running v5.0.0 agent software. DEVICES SUPPORTED: =========================================================================== Ethernet Routing Switch 4548GT-PWR (sysObjectID : 1.3.6.1.4.1.45.3.71.2) running agent software v5.0.0. NOTE: **** This DIT package requires NMS 10.4.2 or later **** CHANGE HISTORY: =========================================================================== 05/09/2007 - Created initial "A" version DIT package. INSTALLATION INSTRUCTIONS: =========================================================================== The default install location for Enterprise NMS DIT packages is: Unix ($OITHOME): /usr/dit Windows NT/2000 (%OITHOME%): :\ENMS\DIT All installation commands are relative to the directory containing the extracted (un-tarred or un-zipped) DIT package. The following commands should be executed in that directory. Manual installation on UNIX ----------------------------------------- 1. Log into Enterprise NMS workstation as root (su command). 2. Open a shell window and prepare your user environment with one of the following commands: source /opt/lnms/bin/opt_cshrc (for csh and tcsh) OR . /opt/lnms/bin/opt_kshrc (for sh or ksh) 3. Create a temporary directory for the DIT package. For example: mkdir /temp 4. Navigate to the directory you just created and download/copy DIT package to this location. Uncompress and untar the package using uncompress NMS_ERS4548GT_PWR_v500_A.tar.Z tar -xvf NMS_ERS4548GT_PWR_v500_A.tar 5. At the command prompt, type ./install (for ENMS 10.4.2.x ) ./install_10.5 (for ENMS 10.5 or later) The installation script runs and copies various files (*.gif, *.mdb, *.dat, etc.) into the appropriate directories. Finally, the ditInstall utility is run to add Ethernet Routing Switch 4548GT-PWR support into Enterprise NMS. Manual installation on Windows ----------------------------------------------- 1. On your workstation, log in as administrator 2. Download and Copy the DIT package (a self-extracting archive) into :\enms\DIT\temp 3. Execute the DIT package file so that all the files in the package are extracted. The files are extracted in the directory :\enms\DIT\temp\NMS_ERS4548GT_PWR_v500_A 4. Open a command window. 5. Navigate to the directory that was created ( cd :\enms\DIT\temp\NMS_ERS4548GT_PWR_v500_A ) 6. At the command prompt type install.bat The installation script runs and copies various files (*.gif, *.mdb, *.dat, etc.) into the appropriate directories. Finally, the ditInstall utility is run to add Ethernet Routing Switch 4548GT-PWR support into Enterprise NMS. Automated install using DITAdmin Tool on both UNIX and Windows ------------------------------------------------------------------- 1. Run ditadmin tool (packaged with NMS), at the command prompt by typing (on Unix and Windows) ditadmin 2. Download the DIT package and make sure that the package is located at: :\enms\DIT (on Windows) /opt/dit (on UNIX) 3. Select Tools->Install Component... menuitem. 4. In the Open dialog box, select the package and click on OK. 5. Another dialog box should come up showing the progress of the DIT install. Select OK once DIT install is completed. Installation Results: --------------------- After successful installation an entry corresponding to Ethernet Routing Switch 4548GT-PWR v5.0.0 will be displayed in the DITAdmin Tool main window. MANAGEMENT FEATURES IN THIS RELEASE: =========================================================================== -- Device/Topology discovery and visualization -- OmniView -- SNMP Traps and Fault correlation -- Integration with HP OpenView and Tivoli NetView NMS platforms. DIT PACKAGE CONTENTS: =========================================================================== install install.bat install_10.5 NMS_ERS4548GT_PWR_v500_A.dit trapreg.dlg ers.20.m ers.20.p ers.26.m ers.26.p ers.32.m ers.32.p ers.38.m ers.38.p ers.44.m ers.44.p ers.50.m ers.50.p ers.64.m ers.64.p ers.ico bayStackLacpExt.mib bayStackMulticastFlooding.mib bayStackStats.mib bayxlr.mib bnlog.mib bsee.mib eapol-d10.mib ers4500_v500_info.dat ers4500_v500_info.mdb ianaAddressFamilyNumbers.mib ianaIfType.mib ieee8023-lag.mib lldp.mib lldpExtDot1.mib lldpExtDot3.mib nnmst.mib nnrst.mib pibFramework.mib pibNtnEvol.mib rapidCity.mib rcBridge.mib rcMlt.mib rcPort.mib rcVlan.mib rfc1213.mib rfc1513.mib rfc2021.mib rfc2213.mib rfc2465-tc.mib rfc2578.mib rfc2579.mib rfc2819.mib rfc2863.mib rfc3289.mib rfc3289tc.mib rfc3411.mib rfc3412.mib rfc3413-notif.mib rfc3413-tgt.mib rfc3414.mib rfc3415.mib rfc3418.mib rfc3584.mib rfc3621.mib rfc3635.mib rfc4001.mib rfc4133.mib rfc4188.mib rfc4363-p.mib rfc4363-q.mib s5age.mib s5cha.mib s5emt.mib s5ifx.mib s5roo.mib s5sbs.mib s5tcs.mib supported_objects synro.mib ers4500x16.gif ers4500x24.gif ers4526fx.gif ers4548gt.gif ers4548gtpwr.gif ers4550t.gif ers4550tpwr.gif mtrj26fx.gif SUPPORTED OPERATING SYSTEMS: =========================================================================== HPUX 11.0 Solaris 2.8 Solaris 2.9 Solaris 2.10 Windows 2000 Server Windows 2003 Server KNOWN LIMITATIONS: =========================================================================== 1) Expanded View is not supported in this release due to: CR Q01653449 - evserver crashes on ERS 4548-GT/PWR CR Q01653418 - Enable/Disable ports in EV not working properly for ERS 4500 2) CR Q01653409 - ENMS created entries in Trap Recievers Table on ERS4500 are deleted at reboot As an work-around to this issue enter manually the IP address of the ENMS server in the Trap Recievers Table on ERS4500. 3) CR Q01653397 - VlanPortMembers textual convention not working for ERS 4500 In stack configuration, for the objects that use this textual convention, OV is not showing the slot and port information correctly. Take for example a stack with two units, one of 48 ports and one of 50 ports, with a single vlan configured and all the ports included in this vlan. For object rcVlanPortMembers OV is displaying the following string: 1/1-1/48,1/65-1/114 instead of : 1/1-1/48,2/1-2/50. Here is a list of objects that use this text-conv and are displayed wrong in OV: rcVlanPortMembers, rcVlanActiveMembers, rcVlanStaticMembers, rcVlanNotAllowToJoin, rcMltPotentialMembers, rcMltPortMembers, rcStgPortMembers, rcStgUnassignedPorts. 4) CR Q01587817 - ERS2500 v400: Active menus in EV for copper port when GBic port is active The same issue appears for ERS 4500 series. 5) CR Q01583676 - Local Vlan port members are displayed wrong for ES and ERS with 48 ports or more The same issue appears for ERS 4500 series in both standalone and stack configuration. =========================================================================== (c) 2005-2007 Nortel Networks Incorporated. All rights reserved. ===========================================================================