Log In for the First Time on Fabric Engine

Onboard your switch with ExtremeCloud^TM. Log in or create your XIQ administrator account in order to select your switch operating system with XIQ at https://extremecloudiq.com

Before logging in, verify that the switch LEDs are on (solid green or blinking green) and that it is connected to a management console as described in Connect to a Management Console.

To perform the initial login and complete initial configuration tasks, follow these steps.

1. Using a terminal emulator such as PuTTY or TeraTerm, connect to the switch using the serial port connection.
   Be sure that your serial connection is set properly:

   • Baud rate: 115200
   • Data bits: 8
   • Stop bit: 1
2. Press [Enter] one or more times until you see the login prompt.
3. At the login prompt, log in using the default user name rwa.

   For example:

   login: rwa

   When prompted for the password, enter rwa.

   When you are logged in with the role-based authentical level of rwa, you can configure the login and password values for the other role-based authentication levels.