Power Cord Requirements for AC-Powered Switches and AC Power Supplies
An AC power cord is not included with the AC power supply.
Power cords used with AC-powered switches or AC power supplies must meet the following requirements:
The power cord must be agency-certified for the country of use.
The power cord must have an appropriate AC connector for connection to the switch or power supply. See the power supply documentation for the appropriate power cord.
The power cord must have an appropriately rated and approved wall plug applicable to the country of installation.
For cords up to 6 feet (2 m) long, the wire size must be 18 AWG (.75 mm2) minimum; over 6 feet, the minimum wire size is 16 AWG (1.0 mm2).
