Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

ipv6 ospf neighbor database-filter-all-out

Use this command to filter outgoing link-state advertisements to an OSPFv3 neighbor on this interface.

Syntax

ipv6 ospf neighbor ipv6-address database-filter-all-out
no ipv6 ospf neighbor ipv6-address database-filter-all-out

Parameters

None.

Defaults

None.

Mode

Interface configuration.

Usage

The “no” form of this command disables the database filter all feature.

Example

This example shows how to set the to 5 for VLAN 1 neighbor 2010:2001:eff0::10:

System(rw-config)->interface vlan 1
System(rw-config-intf-vlan.0.1)->ipv6 ospf neighbor 2010:2001:eff0::10 database-filter-all-out
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page