show port energy-eff-eth (S-, 7100-Series)

Use this command to display the Energy Efficient Ethernet (EEE) information for one or more Ethernet ports that support EEE.

Syntax

show port energy-eff-eth [port-string]

Parameters

port-string (Optional) Displays EEE information for specific port(s).

Defaults

If port-string is not specified, EEE information for all ports will be displayed.

Mode

All command modes.

Example

This example shows how to display the port flow control state for port range tg.1.1:

System(rw)->show port energy-eff-eth tg.1.1
Port: tg.1.1   MIB2 Interface: 13001
--------------------------------------------------------------------
  Energy Eff Eth Admin State    : Disabled
  Energy Eff Eth LLDP TLV State : Disabled
  Energy Eff Eth Oper State     : Disabled
  Admin Rx Tw    :        5 usecs
  Admin Fb Tw    :       20 usecs
  Local
  -------------------------------
  Tx Tw          :        5 usecs
  Rx Tw          :        5 usecs
  Fallback Rx Tw :       20 usecs
  Echo Tx Tw     :        5 usecs
  Echo Rx Tw     :        5 usecs
  Ready to Tx LLDPDU+EEE TLV    : False
  Ready to Rx LLDPDU+EEE TLV    : False
  EEE negotiation Completed     : False
System(rw)->