Network Snapshot: Switch Details

To view network details from the switch screen:

  1. Go to Monitor > Devices > Switches.
  2. Select a switch (not the check box).
    The network details for the selected switch display.
    Hardware details:
    • Power Supplies
    • Fans
    • PoE Budget. Select to see AP capacity estimation based in the current PoE draw.
    • Temperature
    • VIM (Versatile Interface Module)
    Table 1. Tabs on the Switch Details Screen
    Tab Description
    Dashboard Widgets display network details related to the selected switch.
    Ports A list of configured ports on the selected switch.
    LAG Ports Link Aggregation Group (LAG) Ports organized as a list of master ports and the LAG members that are associated with the master port. All ports assigned to a LAG must have the same port function. The configuration of the master port is shared with its LAG members. When a port is added to a LAG, its previous unique configuration is removed and the port inherits the group configuration.
    Note: A Link Aggregation Group whose function is to connect to an AP is limited to two ports in the group. Both ports must negotiate to the same speed (1 Gbps).

    LAG is supported on ExtremeWireless AP39xx and 11ax APs. LAG is not supported on AP305C, AP410C, and AP460C.
    Traces Trace information related to the selected switch.
    VLANS A list of VLANS associated with the switch, including the switch port number.
    Troubleshooting Provides a remote console to enable diagnostic debugging of ExtremeXOS switches.
  3. You can also: Select to modify configuration settings. Select to go back to the list.
9038996-00 Rev. AB