Configure Policy Settings

The following configuration settings are the only settings applicable to switches. All other settings displayed in this section are applicable to wireless products only.

  • DNS Server
  • NTP Server
  • SNMP Server
  • Syslog Server Settings
  • LLDP/CDP

The network policy settings that you configure depend on your requirements. For example, determine which default routing instance to use for NTP, DNS, Syslog, and SNMP for a switch.

This task is part of the network policy configuration workflow. Use this task to configure policy settings.

  1. Go to Configure > Network Policies.
  2. Select an existing network policy, and then select Edit, or select Add to create a new policy.
  3. Configure the Policy Settings.
    1. Configure a DNS Server
    2. Configure an NTP Server
    3. Configure an SNMP Server
    4. Configure a Syslog Server
    5. Configure Device Credentials
    6. Configure LLDP/CDP Policy Settings
      Note

      Note

      To configure LLDP port configurations on SR22XX, 23XX, VOSS, and EXOS devices, go to the device template or device configuration page. Configuring LLDP from this page can affect APs, XR, and 20XX/21XX switches, along with certain EXOS, VOSS, SR22XX, and 23XX Global LLDP parameters.
  4. Select SAVE.
9038988-00 Rev AA