Configure Advanced Settings

Currently, switch onboarding and firmware/configuration updates require manual steps. Use this task to enable the firmware upgrade option, as well as auto config push, during switch onboarding within the defined template for the switch assigned to the associated network policy. Each can be enabled/disabled together or independently.

Go to Configure > Network Policies > existing switch template > Configuration > Advanced Settings.
Optional: Toggle ON Upgrade device firmware upon device authentication.
1. Select your preferred update option:
  - Upgrade firmware to the latest version
  - Upgrade to the specific device firmware version
  Note
  If the selected firmware is already at the latest or defined firmware, then the upgrade device firmware action will not occur.
Optional: Toggle ON Upload configuration automatically.

Note
If upgrade and config push are selected, then the upgrade happens first.
1. Check Reboot and revert Extreme Networks switch configuration if IQAgent is unresponsive after configuration update. check box.