Clone A Device

Use this task to apply the existing device-level configuration from one switch to a new switch with the same model. For example, if you need to replace one switch with another, this task describes how to do so and then apply the existing device-level configurations used by the previous switch.

Note

Licensing is not cloned.

Go to Manage > Devices and select the check box for the device in the Device List.
Select Actions > Clone Device.
Optional: Select the Perform full configuration clone check box to clone additional configurations previously performed through supplemental CLI, SSH proxy, or local console saved on the original device with the same software version (minimum of 32.3.1.11).
Under Replacement Device, if the device is not yet Onboarded, select Quick Onboard, enter the device serial number and proceed to Step 6.

If the device has already been Onboarded, proceed to Step 5.
Under Replacement Serial Number, select the appropriate device serial number.

Note
To onboard a Universal Hardware Switch, for the Device OS, choose Switch Engine or Fabric Engine.
Select Clone.
Select Yes.
Select Perform Update to push the configuration to all selected cloned devices.