Create basic DHCP Server and Relay settings.
Use this task to configure each of the required parameters that the DHCP server
relays to clients, along with an IP address.
-
Enter the IP address of the
Default Gateway for the subnet to which the addresses
in the IP pool belong.
-
Enter the primary DNS server IP
address for clients to contact when resolving domain names to IP
addresses.
-
Enter the secondary DNS server IP
address for clients to contact when resolving domain names to IP
addresses.
-
Enter the tertiary DNS server IP
address for clients to contact when resolving domain names to IP
addresses.
-
Enter the POP3 server IP
address for clients to use.
-
Enter the SMTP server IP
address for clients to use.
-
Enter the primary WINS server IP
address for clients to use.
-
Enter the secondary WINS server IP
address for clients to use.
-
For Lease Time, enter the length of time for the DHCP
lease to last.
-
Enter the Netmask that defines the subnet to which the
addresses in the IP pool belong.
-
Enter the DNS name resolution Domain Name to assign to
DHCP clients.
-
Set the path MTU aging timeout in seconds for clients to
use.
-
Enter the primary NTP server IP
address for DHCP client clock synchronization.
-
Enter the secondary NTP server IP
address for DHCP client clock synchronization.
-
Enter the Log Server IP
address for DHCP clients.
Save the configuration or continue to Custom settings.
