Traffic Filter Settings

Table 1. Settings for Traffic Filters
Setting	Description
Name	Type a Name for the new Traffic Filters object.
Description	Type a Description for the new Traffic Filters object.
IQ Engine APs, Routers and Switches
Control the following types of traffic to devices	Select the corresponding check boxes to enable the selected types of traffic. Enable SSH: Permit an SSH connection to the mgt0 interface. By default, SSH is enabled. Enable Telnet: Permit a Telnet connection to the mgt0 interface. By default, Telnet traffic is disabled. Enable Ping: Permit ICMP echo requests (pings) to reach the mgt0 interface. By default, pinging mgt0 is allowed. Enable SNMP: Permit an SNMP connection to the mgt0 interface. By default, SNMP is disabled. Enable Inter-station Traffic: (Only for APs) Permit inter-station traffic between APs.
Non-IQ Engine Switches (Dell & Extreme Networks)
Control the following types of traffic to devices	Select the corresponding check boxes to enable the selected types of traffic. Enable Telnet: Permit a Telnet connection to the mgt0 interface. By default, Telnet traffic is disabled. Enable Ping: Permit ICMP echo requests (pings) to reach the mgt0 interface. By default, pinging mgt0 is allowed. Does not apply to N1100 series devices.