Interfaces

Device Details for Interfaces

Select the host name of a switch from the Devices table, and then go to Monitor > Monitoring > Interfaces.

Note

The selected switch must be assigned a network policy.

• An interactive port usage diagram and corresponding table appear below the timeline graph. The following widgets and information appear above the diagram:

  

  Widgets and information for switches

  

  • CPU Usage: Hover over the half-pie chart to display usage information.
  • Memory: Hover over the half-pie chart to display memory usage.
  • MAC Table Utilization: Hover over the half-pie chart to display MAC Table usage.
  • Last Seen: Hover over to display the date and time at which the device was last online.
  • Temperature: Displays the temperature at which the device is running. You can also hover over the to display the temperature.
  • Power Supply Status: Hover over to display detailed information about power supply and PoE status.
  • Fan Status: Hover over to display the status of the fans for each tray.
  • IP Address: Displays the IP address of the device.
  • MAC Address: Displays the MAC address of the device.
  • Software Version: Displays the version of the device software.
  • Model: Displays the model of the device.
  • Serial #: Displays the serial number of the device.
  • Make: Displays the make of the device.
  • IQAgent Version: Displays the IQAgent software version.
• The graphic below shows all of the ports on the device. Select a port to display more information.

  Provisioned ports that use the VLAN, both tagged and untagged, light up to indicate VLAN usage. Select a port to display the port name, port status, VLAN untagged/tagged status, and port actions.

• Select the VLAN tab to display a table containing the following information: VLAN Name, VLAN ID, Active Ports (Enabled port with VLAN assigned), STP Instance, IGMP Snooping, and DHCP Snooping information columns. Select a VLAN in the VLAN table to highlight currently assigned ports.
• Select the IPv4 tab to display a table containing the following information: VLAN Name, VLAN ID, IPv4 Forwarding, Routing Instance, and IP Address/Subnet information columns. You can select the VLAN when the row is highlighted.