Configure SES-Imagotag on a Device Override

Use this task to configure SES-Imagotag on a device override.

  1. Go to Manage > Devices
  2. Select one of the supported AP models.

    The following access points support SES-Imagotag:

    • AP305C
    • AP410C
    • AP5010
  3. From the left pane, select Configure > Interface Settings.
  4. Scroll down to the SES-Imagotag pane and select Enable Imagotag.
  5. Configure the SES-Imagotag settings.
9038986-00 Rev AA