| Setting | Description |
|---|---|
| Name | Type a Name for the new VPN service. |
| Description | (Optional) Type a Description for the new VPN service. Although optional, descriptions can be helpful when you are troubleshooting your network. |
| Extreme Networks VPN Gateway | Select this option to configure settings for a VPN using an Extreme Networks device. |
| Third Party Gateway | Select this option to configure settings for a VPN a using third-party (such as, Cisco) device. |
| Extreme Networks VPN Gateway | |
| Number of branches to be created | Type the number of branch sites that you expect to build tunnels to the VPN gateway. |
| Max tunnels per gateway | Type the maximum number of tunnels per gateway. |
| VPN Tunnel Addressing | Select Auto (assigned from management subnetwork) or Use WAN interface IP addresses to use specific IP addresses. |
| VPN Gateway Settings | Select  , and then Select a VPN Gateway from the list.The VPN Gateway Virtual Appliances (VGVA) that appear in this list are added to the network as Layer 3 VPN gateways. To change the settings for a VGVA, go to . |
| Third Party Gateway | |
| VPN Tunnel Addressing | Select Auto (assigned from management subnetwork) or Use WAN interface IP addresses to use specific IP addresses. |
| Select Vendor | Select the vendor name from the list. |
| External IP Address | Type the IP address of the third-party VPN gateway. |
| VPN Access List | Select and type the required Source Network
and Destination Network in the respective
fields. |