Create a network hierarchy with at least one location, building, and floor.
Use this task to automatically add simulated devices to
your network to plan deployment and determine future needs. To manually place devices,
see Manually Add Simulated Devices.
-
Select the type of connectivity
you want from the drop-down list under AUTO PLAN
FOR.
-
Select AUTO PLACE, or enter more parameters by expanding
the More tab.
If you select a connectivity type and then select AUTO
PLACE, ExtremeCloud IQ calculates the number and placement of
devices and the radio band, channel width, device type, and signal strength
settings based on the type of connectivity you selected. Expand the
More tab, to enter these settings yourself and have
ExtremeCloud IQ calculate based on your choices.
-
Select AUTO PLACE.
Target coverage is one factor that determines the number of devices
ExtremeCloud IQ automatically places. For example, for coverage with a signal
strength of -50 dBm, ExtremeCloud IQ places multiple devices on the map to
ensure adequate coverage. A lower signal strength, such as -70 dBm, requires
fewer devices.
ExtremeCloud IQ places simulated devices on your floor plan in the locations
determined to be optimal for the type of wireless network you selected. You can now
move these devices around, add known obstructions, and view heat maps for each
device.
