Register Firmware Host

Procedure

  1. In the Navigation menu, select Device Inventory.
    The Devices window opens.
  2. Select Settings > Firmware Hosts > Register Host.
    The Register Host window opens.
  3. In the Host IP address field, provide the IPv4 or IPv6 address of the firmware host sever.
    If a firmware host server has both IPv4 and IPv6 addresses, each IP address is treated as an independent entry.
  4. In the Protocol field, select one or more options from the available protocols.
    • Packet Broker Mode:
      • SCP
      • TFTP
    • Fabric Mode:
      • FTP
      • SFTP
      • SCP
  5. In the Username field, provide a name.
  6. In the Password field, provide the password.
  7. Select Register Host.
9038969-00 Rev AA