Home > Hardware > ap > AP410C Hardware User Guide
Logo

AP410C Hardware User Guide

AP410C Hardware User Guide

Read about and view specifications and compliance information for the AP410C in this topic. Install the AP410C using this topic.

The AP410C is a high-performance 802.11ax 5G dual band access point designed for indoor high-density environments. This device supports IEEE 802.11ax Orthogonal Frequency-Division Multiple Access (OFDMA) multi-user access.

The AP410C has a Bluetooth BLE i-beacon for location based services.

For more information about Extreme Networks APs see Introduction to Extreme APs.

For regulatory and compliance information, see "Regulatory Compliance Statements".

Important! Change the Country Code

If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the AP will be deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:

Note

Note

The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC regulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.
  1. Power on the AP and allow it to find and connect to ExtremeCloud IQ. Once the AP is connected it appears in the table of devices on the Manage > Devices page.
  2. Select the check box next to the AP, and then choose Assign Country Code from the Actions drop-down list. In the dialog box, select the appropriate country from the drop-down list, and then select Save.
  3. Upload your changes to the device.

Safety Guidelines

Safety Guidelines

The safety information in this section applies to AP410C devices.

The following safety icons are used in these guidelines to identify the type of precaution:

This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment.
This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury or death, and extensive damage to equipment.
This icon indicates a laser caution. Failure to comply with a laser caution can result in serious injury.
The following table lists the safety precautions you should follow when installing your AP410C devices.
Extreme Networks devices must be installed by a professional installer who is certified to install these types of devices and to ensure that they are properly grounded and meet applicable local and national electrical codes.
These devices are intended for indoor use only.
Do not install the device in an environment where the operating ambient temperature might exceed the recommended ranges.
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
For products available in the USA/Canada market, for the 2.4 GHz band, only channels 1-11 can be operated. Selection of other channels is not possible.
Changes or modifications made to this device that are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Use only attachments and accessories specified by Extreme Networks.
These devices are not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or with lack of experience of knowledge unless they are given supervision or instruction concerning use of the devices by a person who is responsible for their safety. Children should be supervised to ensure that they do not play with the devices.
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when electronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-prevention procedures when handling electronic components and equipment.
During operation, the surfaces of the AP410C can become hot. Use caution when handling.
To meet federal radiation exposure requirements, these devices should be installed at a minimum distance of 8" (20 cm) from people or animals.

Install the AP

You can mount the AP410C on a flat surface or wall, or on the rails of a standard dropped ceiling grid. There is also an accessory mounting bracket that allows you to install the device in Armstrong-style dropped ceilings (ordered separately).

The following sections describe how to install your AP410C devices.

Shipping Carton Contents

The AP410C shipping carton contains the following items:

Install the AP on a Ceiling Track

The AP410C ships with a mounting bracket that lets you easily install it on the rail of a standard dropped ceiling grid. The following illustration shows how to attach the bracket to the t-bar rail, and then install the AP on the bracket.

Once the bracket is secure, install the AP using the following steps shown in the illustration.

Accessory Brackets for Non-standard Ceiling and Wall Installation

Order one of the following accessory brackets to install your device on non-standard ceiling tracks, or directly onto a wall:

Marketing SKU # Description
AH-ACC-BKT-AX-IL

Mounting bracket for Armstrong Interlude ceilings
AH-ACC-BKT-AX-SL

Mounting bracket for Armstrong Silhouette 1/8" and Silhouette 1/4" ceilings
AH-ACC-BKT-AX-TB

Replacement Prelude Bracket, T-Bar
AH-ACC-BKT-AX-WL

Mounting bracket for direct-to-wall installations

 

Mount the AP on a Wall

Use the holes in the accessory wall bracket (AH-ACC-BKT-AX-WL) as a template to mark the wall. Drill holes in the wall and attach the bracket to the wall using wall screws and wall anchors if necessary. Attach the AP to the bracket in the same manner as shown in the previous section.

Lock the AP

You can secure the AP using a Kensington® lock in the lock slot on the device, or you can use a security bracket and a crosshead screw or a security screw. Security brackets and screws can be ordered separately from Extreme Networks (not available in Brazil).

Extreme Networks recommends a variety of Kensington locks. For more information, contact your sales representative.

Hardware Components

You can see the hardware components of the AP410C in the illustration below and read about them in the sections that follow.

Component Descriptions

Status Light

The status light conveys operational states for system power, firmware updates, Ethernet and wireless interface activity, and major alarms. The AP410C has two status lights on the top of the chassis. At setup, this light cycles through the following sequence:

Light Sensor LED

The AP410C also has a light sensor on the top of the device.

Ethernet Ports

Two RJ45 Ethernet ports (Eth0 and Eth1) automatically negotiate half- and full-duplex connections with the connecting device. Eth0 is 100/1000/2500 BASE-T, and Eth1 is 10/100/1000 BASE-T. These ports are autosensing and adjust to straight-through and crossover standard Cat5 or better Ethernet cables automatically. The AP receives power through an Ethernet connection to the ETH0 port from PSE (power sourcing equipment) that is compatible with the 802.3at and 802.3at standards.

USB Port

The AP410C has a USB port that you can use to connect USB-based beacons (iBeacon, for example) and IoT (Internet of Things) devices. To access the port, remove the screw that secures the protective cover.

Micro USB Console Port

Through the Console port, you can make a serial connection between your management system and the AP. When you connect to the device using the micro USB Console port, the management station from which you connect to the device must have a VT100 emulation program, such as Tera Term Pro© (a free terminal emulator) or Hilgraeve HyperTerminal® (provided with Windows® operating systems from XP forward).

You can order a Micro USB console adapter cable for this AP here.

The serial connection settings are: 9600 bits per second, 8 data bits, no parity, 1 stop bit, no flow control.

The pin-to-signal mapping for the Console port is shown below:

Pin Definition
1 NC
2 RxD (input to AP)
3 TxD (output to terminal)
4 Signal (GND)
5 Signal (GND)

Reset Button

Use the Reset button to reset the device or restore the factory default settings. Insert a paper clip or similar tool into the Reset pinhole and press the button. To reboot the device, press the button for 5 seconds. To return the configuration to the factory default settings, press it for at least 10 seconds. After releasing the button, the indicator light goes dark, and then glows steady amber while the firmware loads and the system performs a self-test. After the software finishes loading and the AP has connected to ExtremeCloud IQ, the status indicator glows steady white.

To prevent the reset button from resetting the configuration, enter this command:

no reset-button reset-config-enable

When this command is enabled, pressing the button for 5 seconds will still reboot the AP, but pressing it for more than 10 seconds will not reset its configuration.

Security Slot

The AP410C has a security slot for locking the device.

Extreme Networks recommends a variety of Kensington[(r)] locks. For more information, contact your sales representative.

Hardware Specifications

The following sections list radio, device, power, and environmental specifications for the AP410C.

Radio Specifications

Operating Frequency:

Wi-Fi Channel Support

Bluetooth BLE Beacon (BLE 5.0)

802.11a

802.11b

802.11g

802.11n

802.11ac

802.11ax

Transmit Power and Sensitivity Specifications

Note

Note

Output power may be limited by regulatory requirements.

Power: 2.4 GHz:

Tolerance +2/-2 dB @25°C

Channel Data Rate Power (dBm)
11b 1,2,5.5,11 18
11g 54 Mbps 15
  48 Mbps 16
  36 Mbps 17
  6 Mbps 18
HE20 MCS 0,1,2 18
  MCS 3 17
  MCS 4, 5 16
  MCS 6,7 15
  MCS 8,9 14
  MCS 10,11 12
2.4 G Sensitivity    
11b 1 Mbps -99
  11 Mbps -90
11g 6 Mpbs -96
  36 Mpbs -84
  48 Mbps -80
  54 Mbps -78
HE20 MCS 0 -95
  MCS 1 -91
  MCS 2 -89
  MCS 3 -86
  MCS 4 -83
  MCS 5 -79
  MCS 6 -77
  MCS 7 -76
  MCS 8 -72
  MCS 9 -70
  MCS 10 -67
  MCS 11 -64

 

AP410C Power: 5 GHz:

Mode Data Rate Power (dBm)
11a 54 Mbps 17
  48 Mbps 17
  36 Mbps 18
  6 Mbps 19
HE20 MCS 0, 1, 2 19
  MCS 3, 4 17
  MCS 5, 6 16
  MCS 7, 8 15
  MCS 9 14
  MCS 10 13
  MCS 11 12
HE40 MCS 0, 1, 2 17
  MCS 3, 4, 5 16
  MCS 7, 15, 23 14
  MCS 6, 7, 8 15
  MCS 10 13
  MCS 11 12
HE80 MCS 0,1,2 17
  MCS 3,4,5 16
  MCS 6,7,8 15
  MCS 9 14
  MCS 10 13
  MCS 11 12
Sensitivity    
11a 6 Mbps -94
  36 Mbps -83
  48 Mbps -79
  54 Mbps -77
11n HE20 MCS 0 -94
  MCS 1 -91
  MCS 2 -88
  MCS 3 -86
  MCS 4 -82
  MCS 5 -78
  MCS 6 -77
  MCS 7 -75
  MCS 8 -71
  MCS 9 -69
  MCS 10 -66
  MCS 11 -63
11n HE40 MCS 0 -92
  MCS 1 -88
  MCS 2 -86
  MCS 3 -83
  MCS 4 -80
  MCS 5 -76
  MCS 6 -74
  MCS 7 -73
  MCS 8 -69
  MCS 9 -67
  MCS 10 -63
  MCS 11

-60
HE80 MCS 0 -88
  MCS 1 -85
  MCS 2 -83
  MCS 3 -80
  MCS 4 -77
  MCS 5 -73
  MCS 6 -71
  MCS 7 -69
  MCS 8 -66
  MCS 9 -64
  MCS 10 -60
  MCS 11

-57

Tolerance +2/-2 dB @25° C

Mode Data Rate Power (dBm)
11a 6 Mbps 19
  36 Mbps 18
  48 Mbps 16
  54 Mbps 15
11n HE20 MCS 0,1, 2, 3, 4, 8, 9, 10, 11 19
  MCS 13, 21 18
  MCS 14, 22 16
  MCS 15, 23 15
  MCS 12, 16, 17, 18, 19, 20 19
11n HT40 MCS 0,1,2, 3, 4, 8 19
  MCS 5, 13, 21 18
  MCS 7, 15, 23 14
  MCS 9, 10, 11, 12, 16 19
  MCS 10 13
  MCS 17, 18, 19, 20 19
HE80 MCS 0,1,2 17
  MCS 3,4,5 16
  MCS 6,7,8 15
  MCS 9 14
  MCS 10 13
  MCS 11 12
Sensitivity    
11a 6 Mbps -94
  36 Mbps -83
  48 Mbps -79
  54 Mbps -77
11n HE20 MCS 0 -94
  MCS 1 -91
  MCS 2 -88
  MCS 3 -86
  MCS 4 -82
  MCS 5 -78
  MCS 6 -77
  MCS 7 -75
  MCS 8 -71
  MCS 9 -69
  MCS 10 -66
  MCS 11 -63
11n HE40 MCS 0 -92
  MCS 1 -88
  MCS 2 -86
  MCS 3 -83
  MCS 4 -80
  MCS 5 -76
  MCS 6 -74
  MCS 7 -73
  MCS 8 -69
  MCS 9 -67
  MCS 10 -63
  MCS 11

-60
HE80 MCS 0 -88
  MCS 1 -85
  MCS 2 -83
  MCS 3 -80
  MCS 4 -77
  MCS 5 -73
  MCS 6 -71
  MCS 7 -69
  MCS 8 -66
  MCS 9 -64
  MCS 10 -60
  MCS 11

-57

Device Specifications

Eth1: autosensing 10/100/1000G BASE-T/TX Mbps, requiring Cat5 or better cable.

Eth0: autosensing 100/1000/2500G BASE-T/TX Mbps, requiring Cat5 or better cable. The AP receives power through an Ethernet connection to the ETH1 port from PSE (power sourcing equipment) that is compatible with the 802.3at and 802.3at standards.

Antenna Gain

Antenna Plots

The antenna plots for the AP410C are available below. The Ethernet port location is noted on each chart.

AP410C

Antenna 1

Antenna 2

Antenna 3

Antenna 4

Antenna 5

Antenna 6

Antenna 7

Power and Environmental Specifications

Power Specifications

IEEE 802.3at (42.5 - 57.0V) with USB and full transmit power

IEEE 802.3af (37.0 - 57.0V) without USB and reduced transmit power

Power Profile

AP410C 802.3af 802.3at
2.4 G Radio 2x2 (14 dBm) 2x2 (18 dbm)
5 G Radio 3x3 (17 dBm) 4x4 (18 dBm)
Sensor Radio 2.4 G and 5 G (15 dBm) 2.4 G and 5 G (18 dBm)
BLE Enabled Enabled
USB No Yes
2.5 G Ethernet Yes Yes
1 G Ethernet No Yes

Power Consumption

54V ⎓ DC, 0.42A 22.7W Max. PoE with USB

54V ⎓ DC, 0.33A 17.7W Max. PoE without USB

54V ⎓ DC, 0.44A 23.74W Max. PoE with USB

54V ⎓ DC, 0.35A 18.74W Max. PoE without USB

Environmental Specifications

Regulatory Compliance Statements

The regulatory compliance statements in this section apply to Extreme Networks  devices.

Japan Indoor Use

Note

Note

For Japan, the AP410C is restricted for indoor use in the 5150-5350 MHz band only.

Japan Equipment VCCI-B Statement

Compliance Statement - Europe

EU Declaration of Conformity

View full CE Declaration of Compliance and this information online at www.aerohive.com/support/regulatory-compliance

Extreme Networks, Inc. declares that this device complies with the essential requirements of the Radio Eqiupment Directive 2014/53/EU.

a. USA

b. Canada

c. Taiwan

  • 2400-2483 - 28 dBm conducted
  • 5150-5250 - 22 dBm conducted
  • 5725-5850 - 22 dBm conducted

EU Radio Frequency and Power Levels

This product supports the following radio frequencies and power levels in the EU version:

Bulgarian [български]: Този продукт поддържа следните радиочестоти и нива на мощност във версията на ЕU:

Croatian [hrvatski]: Ovaj proizvod podržava sljedeće radijske frekvencije i razinu snage u verziji EU:

Česky [Czech]: [Tento produkt podporuje následující rádiové frekvence a úrovně výkonu ve verzi EU:

Danish [Dansk]: Dette produkt understøtter følgende radiofrekvenser og strømniveauer i EU-versionen:

Dutch [Nederland]: Dit product ondersteunt de volgende radiofrequenties en vermogensniveaus in de EU-versie:

English: This product supports the following radio frequencies and power levels in the EU version:

Estonian [Eesti]: See toode toetab järgmisi raadiosagedusi ja võimsuse taseme ELis versioon:

Finnish [Suomi]: Tämä tuote tukee seuraavia radiotaajuuksia ja tehoja EU-versiossa:

French [Français]: Ce produit prend en charge les fréquences radio et les niveaux de puissance suivants dans la version EU:

German [Deutsch]: Dieses Produkt unterstützt die folgenden Funkfrequenzen und Leistungsstufen in der EU-Version:

Greek [Ελληνική] Αυτό το προϊόν υποστηρίζει τις ακόλουθες ραδιοσυχνότητες και επίπεδα ισχύος στην έκδοση της ΕU:

Hungarian [Magyar]: Ez a termék a következő rádiófrekvenciákat és teljesítményszinteket támogatja az EU verziójában :

Italian [Italiano]: Questo prodotto supporta le seguenti frequenze radio e livelli di potenza nella versione UE:

Latvian [Latviski]: Šis produkts atbalsta šādus radio frekvences un jaudas līmeni ES versiju:

Lithuanian [Lietuvių]: Šis produktas palaiko šiuos radijo dažnius ir galios lygį ES versija:

Maltese [Malti]: Dan il-prodott jappoġġja l-frekwenzi tar-radju li ġejjin u l-livelli ta 'enerġija fil-verżjoni UE:

Pollish [Polski]: Ten produkt obsługuje następujące częstotliwości radiowe i poziomy mocy w wersji unijnej:

Portuguese [Português]: Este produto suporta as seguintes frequências de rádio e níveis de potência na versão UE:

Romanian [Romania]: This product supports the following radio frequencies and power levels in the EU version

Slovak [Slovensky]:Tento produkt podporuje nasledujúce rádiové frekvencie a úrovne napájania vo verzii EÚ:

Slovenian [Slovenija]: Ta izdelek podpira te radijske frekvence in ravni moči v različici EU:

Spanish [Español]: Este producto admite las siguientes frecuencias de radio y niveles de potencia en la versión de la UE:

Swedish [Sverige]: Denna produkt stöder följande radiofrekvenser och effektnivåer i EU-versionen:

UK: This product supports the following radio frequencies and power levels in the EU version:

EU Radiation Warning Statement

To meet radiation exposure requirements, these devices should be installed at a minimum distance of 8" (20 cm) from people or animals.

Restrictions: 5150-5350 MHz for indoor use only.

Bulgarian [български]: За да отговарят на изискванията за излагане на радиация, тези устройства трябва да бъдат инсталирани на минимално разстояние от 20 см от хората или животните.

Ограничения: 5150-5350 MHz само за вътрешна употреба.

Croatian [hrvatski]: Da bi zadovoljili zahtjeve izloženosti zračenju, ti uređaji trebaju biti instalirani na minimalnoj udaljenosti od 20 cm od ljudi ili životinja.

Ograničenja: 5150-5350 MHz samo za unutarnju uporabu.

Czech [Česky]: Aby byly splněny požadavky na ozáření, měly by být tato zařízení instalována v minimální vzdálenosti 20 cm od lidí nebo zvířat.

Omezení: 5150-5350 MHz pouze pro vnitřní použití.

Danish [Dansk]: For at opfylde kravene til strålingseksponering skal disse enheder installeres i mindst 8" (20 cm) afstand fra mennesker eller dyr.

Restriktioner: 5150-5350 MHz kun til indendørs brug.

Dutch [Nederland]: Om aan stralingsblootstelling te voldoen, dienen deze apparaten op een minimumafstand van 8" (20 cm) van mensen of dieren te worden geïnstalleerd.

Beperkingen: 5150-5350 MHz alleen voor gebruik binnenshuis.

English: To meet radiation exposure requirements, these devices should be installed at a minimum distance of 8" (20 cm) from people or animals.

Restrictions: 5150-5350 MHz for indoor use only.

Estonian [Eesti]: Et rahuldada kiirituse nõuetele, need seadmed tuleb paigaldada minimaalselt 8" (20 cm) inimestelt või loomadelt.

Piirangud: 5150-5350 MHz sisetingimustele.

Finnish [Suomi]: Säteilytysvaatimusten täyttämiseksi nämä laitteet on asennettava vähintään 8" (20 cm) etäisyydelle ihmisistä tai eläimistä.

Rajoitukset: 5150-5350 MHz vain sisäkäyttöön.

French [Français]: Pour répondre aux exigences d'exposition aux rayonnements, ces appareils devraient être installés à une distance minimale de 8" (20 cm) des personnes ou des animaux.

Restrictions: 5150-5350 MHz pour usage intérieur seulement.

German [Deutsch]: Um die Anforderungen an die Strahlenbelastung zu erfüllen, sollten diese Geräte in einem Abstand von 8" (20 cm) von Personen oder Tieren installiert werden.

Einschränkungen: 5150-5350 MHz nur für den Innenbereich.

Greek [Ελληνική]: Για την κάλυψη των απαιτήσεων έκθεσης σε ακτινοβολία, οι συσκευές αυτές πρέπει να τοποθετούνται σε απόσταση τουλάχιστον 20 cm από ανθρώπους ή ζώα.

Περιορισμοί: 5150-5350 MHz μόνο για εσωτερική χρήση.

Hungarian [Magyar]: A sugárterhelési követelmények teljesítése érdekében ezeket az eszközöket legalább 8" (20 cm) távolságra kell felszerelni az emberek vagy az állatoktól.

Korlátozások: 5150-5350 MHz csak beltéri használatra.

Italian [Italiano]: Per soddisfare i requisiti di esposizione alle radiazioni, questi dispositivi devono essere installati ad una distanza minima di 20 cm da persone o animali.

Restrizioni: 5150-5350 MHz solo per uso interno.

Latvian [Latviski]: Lai apmierinātu starojuma iedarbības prasībām, šīs ierīces ir uzstādītas pie minimālo attālumu 8" (20 cm) no cilvēkiem vai dzīvniekiem.

Ierobežojumi: 5150-5350 MHz izmantot tikai telpās.

Lithuanian [Lietuvių]: Siekiant patenkinti SPINDULIAVIMĄ reikalavimus, šie įtaisai turi būti įrengiami ne arčiau kaip 8" (20 cm) nuo žmonių ar gyvūnų.

Apribojimai: 5150-5350 MHz naudoti tik patalpose.

Maltese [Malti]: Biex jilħqu l-ħtiġiet ta 'espożizzjoni tar-radjazzjoni, dawn il-mezzi għandhom jiġu installati f'distanza minima ta' 8" (20 ċm) minn nies jew annimali.

Restrizzjonijiet: MHz 5150-5350 għall-użu fuq ġewwa biss.

Polish [Polski]: Aby spełnić wymagania dotyczące narażenia na promieniowanie, urządzenia te powinny być instalowane w odległości minimum 8" (20 cm) od ludzi lub zwierząt.

Ograniczenia: 5150-5350 MHz tylko do użytku wewnętrznego.

Portuguese [Português]: Para atender aos requisitos de exposição à radiação, esses dispositivos devem ser instalados a uma distância mínima de 20 cm (8") de pessoas ou animais.

Restrições: 5150-5350 MHz para uso interno apenas.

Romanian [Romania]: Pentru a îndeplini cerințele de expunere la radiații, aceste dispozitive ar trebui instalate la o distanță minimă de 20 cm de la oameni sau animale.

Restricții: 5150-5350 MHz numai pentru uz intern.

Slovak [Slovensky]: Ak chcete splniť požiadavky na vystavenie žiareniu, mali by byť tieto zariadenia inštalované v minimálnej vzdialenosti od ľudí alebo zvierat od minimálnej vzdialenosti 20 cm.

Obmedzenia: 5150-5350 MHz iba pre vnútorné použitie.

Slovenian [Slovenija]: Da bi zadovoljili zahteve izpostavljenosti sevanja, morajo biti te naprave nameščene na razdalji najmanj 8" (20 cm) iz ljudi ali živali.

Omejitve: 5150-5350 MHz samo za uporabo v zaprtih prostorih.

Spanish [Español]: Para cumplir con los requisitos de exposición a la radiación, estos dispositivos deben instalarse a una distancia mínima de 8" (20 cm) de personas o animales.

Restricciones: 5150-5350 MHz sólo para uso en interiores.

Swedish [Sverige]: För att uppfylla kraven på strålningsexponering bör dessa enheter installeras på minst 8" (20 cm) från människor eller djur.

Restriktioner: 5150-5350 MHz endast för inomhusbruk.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8" (20 cm) between the radiator and people or animals.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Country Code selection feature to be disabled for products marketed to the US/CANADA.

Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Este equipamento não tem direito à proteção contra inteferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.

La operación de este equipo está sujeta a las siguientes dos condiciones

(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y

(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

The operation of this equipment is subject to the following two conditions:

(1) it is possible that this equipment or device does not cause disruptive interference and

(2) this equipment or device must accept any interference, including interference that may cause undesired operation).

Industry Canada Statement:

This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions:

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

Caution:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

Dynamic Frequency Selection (DFS):

Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600 MHz and 5650-5725 MHz.

Sélection dynamique de fréquences (DFS):

Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and people or animals.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et des personnes ou des animaux.

Taiwan Compliance Information

Extreme Networks AP410C

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

應避免影響附近雷達系統之操作

Taiwan MPE Warning

電磁波曝露量MPE標準值(MPE) 1mW/cm2，送測產品實值為0.4088 mW/cm2.

"avoid affecting the operation of nearby radar systems". 應避免影響附近雷達系統之操作

" High-gain directional antennas can only be used in stationary point-to-point systems." 高增益指向性天線只得應用於固定式點對點系統。

European Waste Electrical and Electronic Equipment (WEEE) Notice

In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE):

  1. The symbol above indicates that separate collection of electrical and electronic equipment is required.
  2. When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted municipal waste. It must be collected and treated separately.
  3. It has been determined by the European Parliament that there are potential negative effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment.
  4. It is the users’ responsibility to utilize the available collection system to ensure WEEE is properlytreated.

For information about the available collection system, please contact Extreme Environmental Compliance at Green@extremenetworks.com.

Hazardous Substances Statement and RoHS Chart

Hazardous Substances

This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Copyright © 2020 Extreme Networks. All rights reserved. Published March 2020.