Port Monitoring Display Keys with Auto-Refresh Enabled describes the keys used to control the displays that appear if you use any of the show ports commands without specifying the no-refresh parameter (this is the default behavior).
Key(s) | Description |
---|---|
[U] | Displays the previous page of ports. |
[D] | Displays the next page of ports. |
[Esc] | Exits from the screen. |
[0] | Clears all counters. |
[Space] | Cycles through the following screens:
Note: Available only using the show
ports utilization command.
|
Port Monitoring Display Keys with Auto-Refresh Disabled describes the keys used to control the displays that appear if you use any of the show ports commands and specify the no-refresh parameter.
Key | Description |
---|---|
[Q] | Exits from the screen. |
[Space] | Displays the next page of ports. |