show ip igmp group count group {A.B.C.D} tracked-members source-subnet

Displays the number of tracked-members in the specified IGMP group for a specific source IP address and subnet mask.

Syntax

Command Parameters

{A.B.C.D/X}
Specifies the IP address with mask in A.B.C.D/X or A.B.C.D/X.X.X.X format.
member-subnet {A.B.C.D/X}
Displays the number of tracked-members in the specified IGMP group for specific member IP address and subnet mask.
port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
Displays the number of tracked-members in the specified IGMP group for the specified port list.
Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
vlan <1-4059>
Displays the number of tracked-members in the specified IGMP group for a specific VLAN ID.

Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.

vrf WORD<1-16>
Displays the number of tracked-members in the specified IGMP group for a specific VRF.
vrfids WORD<0-512>
Displays the number of tracked-members in the specified IGMP group for a specific VRF ID.

Default

None

Command Mode

Privileged EXEC

9039038-00 Rev AA