Displays the Auto-sense configuration related to Intermediate-System-to-Intermediate-System (IS-IS) authentication and information related to the L1 metric, such as a legend.
show auto-sense isis
None.
User EXEC
The show auto-sense isis command displays the following information:
|
Output field |
Description |
|---|---|
|
AUTH-TYPE |
Displays the authentication type for IS-IS hello packets on Auto-sense ports. |
|
AUTH-KEYID |
Displays the key ID. |
| AUTH-KEY | Displays the authentication key used by the receiving router to verify the packet. |
| ISIS SPBM L1 METRIC | Displays the global IS-IS Level 1 metric for Auto-sense ports. The higher the value, the lower the cost for a route. |
The following example displays command output.