show ipv6 mroute interface

Displays the IPv6 mroute interface information

Syntax

Command Parameters

gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

User EXEC

Command Output

The show ipv6 mroute interface command displays the following information:

Output field

Description

INTERFACE

Displays the slot and port number or VLAN ID for this entry.

TTL

Displays the datagram time-to-live (TTL) threshold for the interface. IPv6 multicast datagrams with a TTL less than this threshold are not forwarded out of the interface. The default value of 0 means that all multicast packets are forwarded out of the interface.

PROTOCOL

Displays the protocol as one of the following:

  • other(1): none of the following

  • local(2): manually configured

  • netmgmt(3): configured by a network management protocol

  • pimSparseMode(8): PIM-SMv2

  • igmpOnly(10)

  • pimSsmMode(11)

  • spb

Example

The following example displays the IPv6 mroute interface information.

Switch:1>show ipv6 mroute interface

============================================================
                        Mroute Interface - GlobalRouter

============================================================
INTERFACE   TTL       PROTOCOL
------------------------------------------------------------
VLAN 2      1         pimsm   
VLAN 7      1         pimsm   
VLAN 10     1         pimsm   
VLAN 20     1         pimsm   

4 out of 4 total mroute entries displayed
9039038-00 Rev AA