ipv6 prefix-list
Use prefix lists to allow or deny specific route updates. A prefix list policy specifies
route prefixes to match. When there is a match, the route is used. Configure a prefix list
and apply the list to a route policy.
Syntax
-
ipv6 prefix-list
WORD<1-64> name WORD<1-64>
-
ipv6 prefix-list
WORD<1-64> WORD<1-256> ge <0- 128>
-
ipv6 prefix-list
WORD<1-64> WORD<1-256> id <1-2147483647>
-
ipv6 prefix-list
WORD<1-64> WORD<1-256> le <0-128>
-
no ipv6 prefix-list
WORD<1-64> [WORD<1-256>]
Command Parameters
- ge <0-128>
- Specifies the minimum length to
match. Lower bound and higher bound mask lengths together can define a range of
networks.
- id <1-2147483647>
- Specifies the prefix list ID.
- le <0-128>
- Specifies the maximum length to
match. Lower bound and higher bound mask lengths together can define a range of
networks.
- name WORD<1-64>
- Renames the specified prefix list.
The name length is from 1 to 64 characters.
- WORD<1-256>
- Specifies the IPv6 address and
length.
- WORD<1-64>
- Adds a prefix entry to the prefix
list. WORD<1-64> is the prefix-list name. WORD<1-256> is the IPv6
address and length. <ge|le><0- 128> is the minimum and maximum length
to match. Lower bound and higher bound mask lengths together can define a range of
networks.
Command Mode
Global Configuration
