show energy-saver

Syntax

• show energy-saver global

• show energy-saver interface {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

• show energy-saver savings

• show energy-saver schedule

Command Parameters

global

Displays global Energy Saver settings on the switch.

interface {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Displays per-port Energy Saver settings and status on the switch.

Identifies the slot and port in one of the following formats:

• a single slot and port (slot/port)

• a range of slots and ports (slot/port-slot/port)

• a series of slots and ports (slot/port,slot/port,slot/port)

• all ports on the same slot (slot/all)

• all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

savings

Displays Energy Saver power savings on the switch.

schedule

Displays information about Energy SaverEnergy Saver schedules configured on the switch.

Default

None

Command Mode

Privileged EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Matrix.