ip igmp stream-limit-group

Syntax

• default ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

• default ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} enable

• ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} enable max-streams <0-65535>

• ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} max-streams <0-65535>

• no ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

• no ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} enable

Command Parameters

{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

• a single slot and port (slot/port)

• a range of slots and ports (slot/port-slot/port)

• a series of slots and ports (slot/port,slot/port,slot/port)

• all ports on the same slot (slot/all)

• all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

max-streams <0-65535>

Configures the maximum number of allowed streams for the specified ports on this VLAN. The range is from 0-65535 and the default is 4. To use the default configuration, use the default option in the command: default ip igmp stream-limit-group <ports>

Default

None

Command Mode

VLAN Interface Configuration