monitor ports statistics interface

Monitor port interface statistics.

Syntax

Command Parameters

from {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
Monitors port DHCP-relay statistics.
Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
main
Monitors port interface statistics.
utilization
Monitors port interface utilization statistics.
utilization from {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
Monitors port DHCP-relay statistics from a particular starting port.
Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
verbose
Monitors port interface statistics.
verbose from {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
Specifies the slot and port.
Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

Privileged EXEC

9039038-00 Rev AA