filter acl ace action

Syntax

• default filter acl ace action <1-2048> <1-2000> { permit | deny } internal-qos

• default filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt

• default filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt count

• default filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt count redirect-next-hop

• default filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt redirect-next-hop

• default filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt redirect-next-hop unreachable

• default filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-ports

• default filter acl ace action <1-2048> <1-2000> { permit | deny } redirect-next-hop

• default filter acl ace action <1-2048> <1-2000> { permit | deny } remark-dot1p

• default filter acl ace action <1-2048> <1-2000> { permit | deny } remark-dscp

• default filter acl ace action <1-2048> <1-2000> { permit | deny }

• default filter acl ace action <1-2048> <1-2000> { permit | deny } count

• filter acl ace action <1-2048> <1-2000> { permit | deny }

• filter acl ace action <1-2048> <1-2000> { permit | deny } count

• filter acl ace action <1-2048> <1-2000> { permit | deny } internal-qos <0-7>

• filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt <1-512>

• filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-ports {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

• filter acl ace action <1-2048> <1-2000> { permit | deny } redirect-next-hop WORD<1-45>

• filter acl ace action <1-2048> <1-2000> { permit | deny } remark-dot1p <0-7>

• filter acl ace action <1-2048> <1-2000> { permit | deny } remark-dscp <0-256 | 0-256>

• filter acl ace action <1-2048> <1-2000> { permit | deny } redirect-next-hop WORD<1-45> [count | unreachable | vrf {WORD <1-16>}]

• filter acl ace action <1-2048> <1-2000> { permit | deny } redirect-next-hop WORD<1-45> unreachable { permit | deny }

• filter acl ace action <1-2048> <1-2000> { permit | deny } redirect-next-hop WORD<1-45> unreachable { permit | deny } count

• filter acl ace action <1-2048> <1-2000> { permit | deny } redirect-next-hop WORD<1-45> vrf WORD <1-16> unreachable { permit | deny }

• filter acl ace action <1-2048> <1-2000> { permit | deny } redirect-next-hop WORD<1-45> vrf WORD <1-16> unreachable { permit | deny } count

• no filter acl ace action <1-2048> <1-2000> { permit | deny }

• no filter acl ace action <1-2048> <1-2000> { permit | deny } count

• no filter acl ace action <1-2048> <1-2000> { permit | deny } internal-qos

• no filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt

• no filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt count

• no filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt count [log [redirect-next-hop]]

• no filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt count redirect-next-hop

• no filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt log

• no filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt log redirect-next-hop

• no filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-mlt redirect-next-hop

• no filter acl ace action <1-2048> <1-2000> { permit | deny } monitor-dst-ports

• no filter acl ace action <1-2048> <1-2000> { permit | deny } remark-dscp

• no filter acl ace action <1-2048> <1-2000> { permit | deny } redirect-next-hop

• no filter acl ace action <1-2048> <1-2000> { permit | deny } remark-dot1p

Command Parameters

<1-2000>

Specifies the ACE ID.

<1-2048>

Specifies the ACL ID.

<permit|deny>

Configures the action mode for security access control entries (ACEs). Each ACE has a mode of permit or deny the matched traffic. You can use filters to configure metering of permitted traffic.

Note

For each Security ACE, you must define one or more actions as well as the associated action mode (permit or deny). Otherwise, the security ACE cannot be enabled. There is no default configuration for Security ACEs.

With QoS ACEs, the action mode is not configurable. QoS ACEs are always set to action mode permit.

count

Enables the ability to count matching packets. Use this parameter with either a security or QoS access control entry (ACE). The default is disabled.

internal-qos

Configures the Quality of Service (QoS) level. The default value is 1.

monitor-dst-mlt <1-512>

Configures mirroring to a destination MLT group. This action is a security action.

monitor-dst-ports {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Configures mirroring to a destination port or ports. This action is a security action.

Identifies the slot and port in one of the following formats:

• a single slot and port (slot/port)

• a range of slots and ports (slot/port-slot/port)

• a series of slots and ports (slot/port,slot/port,slot/port)

• all ports on the same slot (slot/all)

• all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

redirect-next-hop WORD<1-15>

Specifies the next-hop IP address for redirect mode (a.b.c.d). This action is a security action.

vrf WORD<1-16>

Applies a VRF name to the redirect next hop IP address.

remark-dot1p <0-7>

Specifies the new 802.1 priority bit for matching packets: zero, one, two, three, four, five, six, or seven. This action is a QoS action.

remark-dscp <0-63>

Specifies the new Per-Hop Behavior (PHB) for matching packets:

• phbcs0

• phbcs1

• phbaf11

• phbaf12

• phbaf13

• phbcs2

• phbaf21

• phbaf22

• phbaf23

• phbcs3

• phbaf31

• phbaf32

• phbaf33

• phbcs4

• phbaf41

• phbaf42

• phbaf43

• phbcs5

• phbef

• phbcs6

• phbcs7

This action is a QoS action.

Default

The default to configure ACE actions to meter flows after a packet matches an ACE is disabled.

Command Mode

Global Configuration