show radius dynamic-server

Display configuration or statistical information about RADIUS dynamic session clients.

Syntax

show radius dynamic-server [client WORD<0-255>] [statistics]

Command Parameters

statistics: Display statistics for RADIUS Dynamic Authorization clients.
WORD<0-255>: Specifies the client address or FQDN.

Default

None

Command Mode

User EXEC

Examples

The show radius dynamic-server command displays the following information:

Switch:1>show radius dynamic-server 

==========================================================================================
                        RADIUS Dynamic Authorization General Info
==========================================================================================
CLIENT                                   UDP        CLIENT     SECRET
ADDRESS                                  PORT       ENABLED    KEY
------------------------------------------------------------------------------------------
192.0.2.15                               1026       Disabled   ****************
192.0.2.16                               1027       Disabled   ****************
host.example.com                         3799       Enabled    **************** 
------------------------------------------------------------------------------------------

All 2 out of 2 Total Num of RADIUS Dynamic Authorization clients displayed

The following output displays dynamic server statistics:

Switch:1>show radius dynamic-server statistics

================================================================================
                 RADIUS Dynamic Authorization Global Statistics
================================================================================
Disconnects From Invalid Client Addresses:     0
CoAs From Invalid Client Addresses:            0
--------------------------------------------------------------------------------