show rmon address-map

View Remote Network Monitoring (RMON) settings to see the maps of network layer address to physical address to interface.

Syntax

show rmon address-map

Command Parameters

address-map: Displays the RMON control tables on the switch.

Default

None

Command Mode

User EXEC

Command Output

The show rmon address-map command displays the following information:


Output field	Description
PROTOIDX	Shows a unique identifier for the entry in the table.
HOSTADDR	Shows the network address for this entry. The format of the value depends on the protocol portion of the local index.
SOURCE	Shows the interface or port on which the network address was most recently seen.
PHYADDR	Shows the physical address on which the network address was most recently seen.
LASTCHANGE	Shows when the entry was created or last changed. If this value changes frequently, it can indicate duplicate address problems.

Example

The following example displays the RMON address map table on the switch.

Switch:1>show rmon address-map
========================================================================
                             Rmon Address Map Table
========================================================================
PROTOIDX  HOSTADDR         SOURCE  PHYADDR            LASTCHANGE
------------------------------------------------------------------------
1         192.0.2.11        3     b0:ad:aa:42:a5:03  05/04/21 08:20:13