show ipv6 dhcp-relay

Display information about the IPv6 Dynamic Host Configuration Protocol (DHCP) relay counters.

Syntax

show ipv6 dhcp-relay counters
show ipv6 dhcp-relay counters [vrf WORD<1-16>]
show ipv6 dhcp-relay counters [vrf WORD<1-16>] [vrfids WORD<0-512>]
show ipv6 dhcp-relay counters [vrfids WORD<0-512>]

Command Parameters

vrf WORD<1-16>: Specifies a VRF name.
vrfids WORD<0-512>: Specifies a VRF by ID.

Default

None

Command Mode

User EXEC

Command Output

The show ipv6 dhcp-relay counters command displays the following information:


Output field	Description
INTERACE	Shows the VLAN or port associated with the respective relay interface.
REQUESTS	Shows the number of DHCP requests on this interface.
REPLIES	Shows the number of DHCP replies on this interface.

Example

Switch:1>show ipv6 dhcp-relay counters 

================================================================================
                                DHCPv6 Counters
================================================================================
INTERFACE                                REQUESTS   REPLIES    
--------------------------------------------------------------------------------
1111:0:0:0:0:0:0:1111                    1         1