show isis int-counters

Display Intermediate-System-to-Intermediate-System (IS-IS) interface counters.

Syntax

show isis int-counters
show isis int-counters [home|remote]

Command Parameters

home: Displays the IS-IS interface counters that the system configures in the home area.
remote: Displays the IS-IS interface counters that the system configures in the remote area.

Default

None

Command Mode

User EXEC

Command Output

The show isis int-counters command displays the following information:


Parameter	Description
IFIDX	Shows the interface index for the Ethernet or MLT interface.
LEVEL	Shows the level of the IS-IS interface.
AUTH FAILS	Shows the number of times authentication has failed per interface.
ADJ CHANGES	Shows the number of times the adjacencies have changed.
INIT FAILS	Shows the number of times the adjacency has failed to establish.
REJ ADJ	Shows the number of times the adjacency was rejected by another router.
ID LEN	Shows the ID field length mismatches.
MAX AREA	Shows the maximum area address mismatches.
LAN DIS CHANGES	Shows the number of times the DIS has changed.
AREA	Indicates the type of area as home or remote.
AREA-NAME	Indicates the name of the area.

Example

Switch:1>show isis int-counters
===============================================================================================
                                   ISIS Interface Counters
===============================================================================================
IFIDX    LEVEL   AUTH    ADJ       INIT    REJ   ID LEN  MAX AREA  LAN DIS  AREA  AREA-NAME
                 FAILS   CHANGES   FAILS   ADJ                     CHANGES 
----------------------------------------------------------------------------------------------
Mlt2     Level 1  0       1        0       0      0       0        0        HOME  area-9.00.02     
Port1/21 Level 1  0       1        0       0      0       0        0        HOME  area-9.00.02