Displays the IS-IS Multi-area SPB layer 2 multicast snooping redistribution configuration on the switch.
show isis multi-area l2 redistribute snoop-multicast
The default is none.
User EXEC
This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Matrix.
The show isis multi-area l2 redistribute snoop-multicast command displays the following information:
Parameter |
Description |
---|---|
ISID |
Indicates the I-SID value. |
ISID LIST |
Indicates the name of the I-SID list. |
DIRECTION |
Indicates the direction of the redistribution policy. |
ENABLE |
Indicates if the redistribution policy is enabled on the switch. |
RPOLICY |
Indicates the route policy for IS-IS Multi-area SPB layer 2 multicast snooping redistribution for a specific I-SID or I-SID list. |
Displaying the IS-IS Multi-area SPB layer 2 multicast snooping configuration:
Switch:1>show isis multi-area l2 redistribute snoop-multicast ================================================================================= MULTI-AREA L2 SNOOP MULTICAST REDISTRIBUTE BY ISID ================================================================================= ISID DIRECTION ENABLE RPOLICY --------------------------------------------------------------------------------- 1100 home-to-remote TRUE test ================================================================================= MULTI-AREA L2 SNOOP MULTICAST REDISTRIBUTE BY ISID LIST ================================================================================= ISID LIST DIRECTION ENABLE RPOLICY --------------------------------------------------------------------------------- List1 home-to-remote TRUE test ---------------------------------------------------------------------------------