show fa elements

Display Fabric Attach discovery elements.

Syntax

show fa elements [{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Command Parameters

{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

a single slot and port (slot/port)
a range of slots and ports (slot/port-slot/port)
a series of slots and ports (slot/port,slot/port,slot/port)
all ports on the same slot (slot/all)
all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

User EXEC

Example

The following example output displays the Fabric Attach discovery elements.

Switch:1>show fa elements

================================================================================
                        Fabric Attach Discovery Elements
================================================================================
                         MGMT                                         ELEM ASGN
PORT   TYPE              VLAN STATE  SYSTEM ID                        AUTH AUTH
--------------------------------------------------------------------------------
1/1    proxyRing         0    T / S  c8:66:5d:f6:d7:20:00:00:00:09    AP   N
1/5    proxy             710  T / S  50:61:84:ee:8c:00:20:00:00:01    AP   AP
1/6    proxy             710  T / S  50:61:84:ee:8c:00:20:00:00:01    AP   AP

================================================================================
                      Fabric Attach Authentication Detail
================================================================================
       ELEM OPER                      ASGN OPER
PORT   AUTH STATUS                    AUTH STATUS
--------------------------------------------------------------------------------
1/1    successAuth                    sucessAuth
1/5    successAuth                    successAuth
1/6    successAuth                    successAuth

State Legend: (Tagging/AutoConfig)
T= Tagged,    U= Untagged,    D= Disabled,    S= Spbm,    V= Vlan,    I= Invalid

Auth Legend:
AP= Authentication Pass,  AF= Authentication Fail,
NA= Not Authenticated,  N= None

--------------------------------------------------------------------------------

3 out of 3 Total Num of fabric attach discovery elements displayed