eapol fail-open-isid

Specifies the Fail Open I-SID for this port. If the switch declares the RADIUS servers unreachable, all new devices are allowed access into the configured Fail Open I-SID.

Syntax

default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} fail-open-isid <1-16000000>
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} fail-open-isid <1-16000000>
no eapol fail-open-isid

Command Parameters

<1-600000>: Specifies the Fail Open I-SID. 0 indicates that Fail Open I-SID is not enabled for this port.

Default

None

Command Mode

GigabitEthernet Interface Configuration

9039038-00 Rev AA