show interfaces gigabitethernet statistics lacp

Display individual Link Aggregation Control Protocol (LACP) statistics for specific ports to manage network performance.

Syntax

Command Parameters

{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

Privileged EXEC

Command Output

The show interfaces gigabitethernet statistics lacp command displays the following information:

Output field

Description

PORT_NUM

Indicates the port number.

TX LACPDU

The count of transmitted LACP data units.

RX LACPDU

The count of received LACP data units.

TX MARKERPDU

The count of transmitted marker protocol data units.

RX MARKERPDU

The count of received marker protocol data units.

TX MARKERRESPPDU

The count of transmitted marker protocol response data units.

RX MARKERRESPPDU

The count of received marker protocol response data units.

RX UNKNOWN

The count of received unknown frames.

RX ILLEGAL

The count of received illegal frames.
9039038-00 Rev AA