Manually initiate an SPF run, or calculation, to immediately update the OSPF LSDB. This configuration is useful if
you need to immediately restore a deleted OSPF-learned route
the routing table entries and the LSDBs do not synchronize
Change the VRF instance as required to configure OSPF on a specific VRF instance. The VRF must have an RP trigger of OSPF. Not all parameters are configurable on non-default VRFs.
Important
This process is computationally intensive. Use this command only if required.
After you initiate an SPF run, wait at least 10 seconds before you initiate another SPF run.