Configure Custom Option Data for a Vendor Class

Before you begin

Perform this procedure to configure custom vendor option data for the vendor class.

Note

The switch follows inheritance and precedence rules for configured DHCP Server options. For more information, see DHCP Server.

Enter Global Configuration mode:

enable

configure terminal
Configure custom option data for the vendor class:

ip dhcp-server vendor-class <1-255> custom-option-data <224-254> value WORD<0-128>

Configure custom option data for the vendor class:

Switch:1>enable
Switch:1#config t
Switch:1(config)#ip dhcp-server vendor-class 20 custom-option-data 246 value 192.0.2.24
<cr>

The following table defines parameters for the ip dhcp-server vendor-class command.


Variable	Definition
`WORD<1-255>`	Specifies the vendor class ID.
custom-option-data `WORD<224-254>`	Specifies the DHCP code that identifies the custom option.
value `WORD<0-128>`	Specifies a data value to apply to this vendor class.