Apply an MKA Profile to a Port
Before you begin
You must configure an MKA profile globally before you can apply it to a port.
About this task
Use the following procedure to apply a MACsec Key Agreement (MKA) profile on a port.
Procedure
- In the Device Physical View, select the port to which you want to apply an MKA profile.
- In the navigation pane, expand .
- Select General.
- Select the MACsec MKA tab.
- For MACsecMKAProfileName, select the name of the MKA profile you want to apply.
- Select Apply.
MACsec MKA Field Descriptions
Use the data in the following table to use the MACsec MKA tab.
Name | Description |
---|---|
MACsecMKAProfileName |
Specifies the MKA profile name. |
MKA Enable |
Enables the MKA profile on the port. The default is disabled. |