Link the IPsec Security Association to an IPsec Policy

Use the following procedure to link the security association to an IPsec policy.

Before you begin

  • The IPsec security association and IPsec policy must exist.

About this task

You cannot delete or modify a security association if the security association links to a policy. To modify a parameter in the security association, or to delete the security association, you must first unlink the security association from the policy. You can only unlink a security association from a policy if the policy does not link to an interface. If a policy links to an interface, you must first unlink the policy from the interface, and then unlink the policy from the security association.

Procedure

  1. In the navigation pane, expand Configuration > Security > Control Path.
  2. Select IPSec.
  3. Select the Policy SA Link tab.
  4. Select Insert.
  5. In PolicyName, type the IPsec policy name.
  6. In SAName, type the security association name.
  7. Select Insert.

Policy SA Link Field Descriptions

Use the data in the following table to use the Policy SA Link tab.

Name

Description

PolicyName

Specifies the name of the IPsec policy.

SAName

Specifies the name of the security association.