Display IKEv2 Profiles

Use the following procedure to display the configured IKEv2 profiles.

Procedure

Enter Privileged EXEC mode:

enable
Display all IKEv2 profiles:

show ike v2-profile
Display a specific IKEv2 profile:

show ike v2-profile WORD<1–32>

Example

Switch:1#show ike v2-profile test
==========================================================================================
                                  IKE2 Profile

==========================================================================================
                                 Hash               Encrypt                  Encrypt       Exchange
Name                             Algo               Algo                     Key Length    Mode    
------------------------------------------------------------------------------------------
test                             sha256                aesCbc                   256        main    


==========================================================================================
                                  IKE2 Profile

==========================================================================================
                                 DH                           Integrity                  Lifetime  
Name                             Group                        Algorithm                  seconds   
------------------------------------------------------------------------------------------
test                             modp2048                     sha256                     180

Variable Definitions

The following table defines parameters for the show ike v-2profile command.


Variable	Value
`WORD<1–32>`	Specifies the name of the policy.