Create an SBT Entry

You can build a snooping binding table (SBT), which contains entries from only trusted devices or hosts. This SBT table is used to validate Neighbor Discovery (ND) packets.

About this task

Use this procedure to create an SBT entry.

Procedure

  1. In the navigation pane, expand Configuration > IPv6.
  2. Select FHS.
  3. Select the Snoop Binding tab.
  4. Select Insert.
  5. Configure the parameters for the snoop binding.
  6. Select Insert.
  7. Optional: Select Refresh to update the results.

Snoop Binding Field Descriptions

Use the data in the following table to use the Snoop Binding tab. The system displays a subset of these fields if you select Insert.

Name

Description

VlanId

Specify the VLAN to which the snooped entry belongs.

Ipv6Address

Enter the IPv6 address assigned to the IPv6 host.

MacAddress

Enter the MAC address of the snooped entry.

InterfaceIndex

Specify the interface on which the entry is learnt.

EntryType

Indicates the type of entry - static (1) or dynamic (2).

EntrySource

Indicates the method entry was learnt from - static (1) or dhcp (2).

ValidTime

Indicates the valid time for the snooped entry.

TimeToExpiry

Indicates the time to expiry of the snooped entry.