Configure Maximum Number of ECMP Paths
Before you begin
Enable ECMP on the switch before configuring the max-path value. For more information, see Enable IPv6 ECMP.
About this task
Use the following procedure to configure the maximum number of ECMP paths.
Procedure
Example
Enable ECMP on the switch and configure the maximum number of ECMP paths to 4:
Switch:1>enable Switch:1#configure terminal Switch:1(config)#ipv6 ecmp enable Switch:1(config)#ipv6 ecmp max-path 4
Variable Definitions
The following table defines parameters for the ipv6 ecmp max-path command.
Variable |
Value |
---|---|
<1-8> |
Specifies the maximum number of ECMP paths. The default is 1. |