Display the RSTP Configuration Information

Perform the following procedure to display the RSTP-related port level configuration details.

Procedure

To enter User EXEC mode, log on to the switch.
Display RSTP configuration information:

show spanning-tree rstp port config {sub-port]][,...][slot/all][all]}

Note

If your platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Example

Display RSTP configuration information:

Switch:1>
show spanning-tree rstp port config 1/1
========================================================================
                      RSTP Port Configurations
========================================================================
Port Number                 : 1/1
Port Priority               : 128 (0x80)
Port PathCost               : 200000000
Port Protocol Migration     : False
Port Admin Edge Status      : False
Port Oper Edge Status       : False
Port Admin P2P Status       : Auto
Port Oper  P2P Status       : False
Port Oper  Protocol Version : Rstp

Variable Definitions

Use the data in the following table to use optional parameters with the show spanning-tree rstp port config command.


Variable	Value
{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}	Identifies the slot and port in one of the following formats: a single slot and port (slot/port) a range of slots and ports (slot/port-slot/port) a series of slots and ports (slot/port,slot/port,slot/port) all ports on the same slot (slot/all) all ports on the switch (all) If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.