Display IS-IS Multi-area SPB Layer 2 Multicast Snooping Redistribution Configuration

Note

The following procedure only applies to 5520 Series and 5720 Series.

About this task

Perform this procedure to display the IS-IS Multi-area SPB layer 2 multicast snooping redistribution configuration on the switch.

Procedure

To enter User EXEC mode, log on to the switch.
Display the multicast snooping redistribution configuration:

show isis multi-area l2 redistribute snoop-multicast

Example

Displaying the IS-IS Multi-area SPB layer 2 multicast snooping redistribution configuration on the switch:

Switch:1>show isis multi-area l2 redistribute snoop-multicast
=================================================================================
               MULTI-AREA L2 SNOOP MULTICAST REDISTRIBUTE BY ISID
=================================================================================
ISID       DIRECTION            ENABLE     RPOLICY
---------------------------------------------------------------------------------
1100      home-to-remote        TRUE       test
=================================================================================
            MULTI-AREA L2 SNOOP MULTICAST REDISTRIBUTE BY ISID LIST
=================================================================================
ISID LIST           DIRECTION            ENABLE     RPOLICY
---------------------------------------------------------------------------------
List1               home-to-remote       TRUE       test

---------------------------------------------------------------------------------