Enable IPFIX Globally

About this task

Use the following procedure to enable IPFIX globally. IPFIX provides the ability to monitor IPv4 traffic flows.

The default global state is disabled.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Enable IPFIX:

    ip ipfix enable

Examples

Enable IPFIX globally:

Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Switch:1(config)#ip ipfix enable

Disable IPFIX globally:

Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Switch:1(config)#no ip ipfix enable 

By disabling IPFIX globally, all the processes and traffic
sent to collector(s) will be stopped.Do you agree (y/n) ? y