View the OSPF Area Information

View the OSPF area information.

Procedure

Enter Privileged EXEC mode:

enable
View the OSPF area information:

show ip ospf area [vrf WORD<1-16>] [vrfids WORD<0-512>]

Example

View the OSPF area information:

Switch:1>enable
Switch:1#show ip ospf area
============================================================================================================================================
                                                          OSPF Area - GlobalRouter
============================================================================================================================================
AREA_ID         STUB_AREA  NSSA          IMPORT_SUM ACTIVE_IFCNT    NSSA TRANSLATOR    NSSA TRANSLATOR    NSSA TRANSLATOR    NSSA TRANSLATOR
                                                                       ROLE            STATE           STABILITY INTERVAL       EVENTS
--------------------------------------------------------------------------------------------------------------------------------------------
0.0.0.0         false      false         true       0               candidate         disabled                  40                0

STUB_COST INTRA_AREA_SPF_RUNS  BDR_RTR_CNT ASBDR_RTR_CNT LSA_CNT   LSACK_SUM
--------------------------------------------------------------------------------------------------------------------------------------------
0         0                    0           0             0         0

Variable definitions

The following table defines parameters for the show ip ospf area command.


Variable	Value
vrf WORD<1-16>	Specifies a VRF by name.
vrfids WORD<0-512>	Specifies a range of VRF IDs.