Enable Square-SMLT Globally

Use square-Split MultiLink Trunking (SMLT) to form an SMLT aggregation group. In a square configuration, enable square-SMLT globally on each of the four switches.

About this task

Important

The following configuration also activates full-mesh configurations.

Note

This procedure is supported only on a DvR Controller. It is not supported on a DvR Leaf node.

Procedure

In the navigation pane, expand Configuration > IP
Select Multicast.
Select the Globals tab.
Select MulticastSquareSmltEnable.

Clear this check box if you want to disable square-SMLT globally.
Select Apply.