Configure Link LSA Suppression
About this task
Use the following procedure to configure link LSA suppression on a port or a VLAN, to decrease unnecessary link LSA generation and flooding for non-broadcast and non-NBMA interface.
Procedure
Example
Variable definitions
Following table describes the variables to the ipv6 ospf area {A.B.C.D} network p2p link-lsa-suppression command.
Variable |
Description |
---|---|
area {A.B.C.D} |
Create an IPv6 OSPF area. |
network |
Sets the type of interface. |
[eth|NBMA|p2mp|p2p|passive] |
Specifies the type of interface. |
link-lsa-suppression |
Enables link LSA suppression. |