Enable SPB-PIM Gateway on a Brouter Port Interface

About this task

Enable SPB-PIM Gateway on a Brouter port.

Procedure

  1. In the Device Physical View tab, select the port you need to configure.
  2. In the navigation pane, expand Configuration > Edit > Port.
  3. Select IP.
  4. Select the SPB-PIM-GW tab.
  5. Select Enable.
  6. Select Apply.

SPB-PIM-GW Field Descriptions

Use the data in the following table to use the SPB-PIM-GW tab.

Name

Description

Enable

Enables SPB-PIM Gateway on the interface. The default is disabled.

OperState

Displays the current operational state of this SPB-PIM Gateway interface.

Address

Displays the primary IP address of this router on this SPB-PIM Gateway interface.

AddressMask

Displays the primary IP address mask of this router on this SPB-PIM Gateway interface.

HelloInterval

Configures the PIM HELLO transmission interval.

JoinPruneInterval

Configures the PIM JOIN PRUNE transmission interval.