Associate a Port and MLT with an I-SID for ELAN

About this task

Use the following procedure to associate a port and MLT with an I-SID.

You must configure Switched UNI.

Procedure

  1. In the navigation pane, expand Configuration > Fabric.
  2. Select ISID.
  3. On the Service tab, select a row with the type configured as elan.
  4. Select Switched Uni.
  5. Select Insert.
  6. Enter the VLAN ID in the Cvid field.
  7. Select Port or Mlt to update the interface index in the IfIndex field.
  8. Select Insert.

Switched Uni Field Descriptions

Use the data in the following table to use the Switched Uni tab.

Name

Description

Isid

Displays the I-SID.

Cvid

Specifies the customer VLAN identifier.

IfIndex

Specifies the interface index of the ELAN end point.

Bpdu

Enables or disables for an untagged end point. The default is disabled.

OriginBitmap

Specifies the origin information of the service associated with the I-SID ELAN end point.

MacBased

Shows if the current entry is associated to a MAC-based Switched User Network Interface (S-UNI).